Parquet Know-how

Bauwerk parquet structure: 
2-layer and 3-layer parquet

Precision, quality and elegance: the multi-layer parquet structure is the basis for these features of our parquet.

Precision, quality and elegance: the multi-layer parquet structure is the basis for these features of our parquet.

One of the many advantages of parquet is its longevity. The durability of the top layer of the parquet is a decisive factor here, but it’s not the only one: The structural quality, the impeccable bonding of components, and the precise processing are all decisive factors for the durability of the parquet.

 

Different types of parquet structure:

Bauwerk Parkett offers three different types of parquet structure in its range:

  • Two-layer structure, based on a solid spruce-fir underlayer
  • Two-layer structure, based on a high-density fibreboard (HDF) underlayer
  • Three-layer structure, with a spruce-fir intermediate layer and HDF end pieces

We guarantee top Bauwerk quality based on professional competence and the latest technology, regardless of the structure you choose. Years of experience, precision and efficiency are key for quality-critical process steps. All that comes into play when producing our 2-layer and 3-layer parquet: The top layer is bonded and pressed to the base using a stack press. The adhesive we use is formaldehyde-free, eco-friendly and 100% healthy for living.

2 couches : sous-couche épicéa-sapin
2 couches :Sous-couche HDF
3 couches : couche intermédiaire en sapin-épicéa avec des pièces terminales en HDF.

2-layer parquet:
Spruce-fir underlayer

2-layer parquet:
HDF sublayer

3-layer parquet
middle layer in spruce with end pieces in HDF

Parquet empilé

2-layer parquet

2-layer parquet is always full-surface bonded to the substrate floor. This makes walking on it very quiet. Thanks to its low thickness, this parquet has excellent heat transfer resistance and is very good for installing with underfloor heating. 2-layer parquet can be installed on top of other flooring or fixed structural components without expansion profiles and with virtually no seams. 

Top layer

The top layer of parquet, also known as the wear layer, is at least Solid wood2.5 mm thick. Different types of high-value wood are used for the top layer, including oak, beech, maple, walnut and cherry. If necessary, the top layer can be sanded down and renovated, multiple times, thus making it a particularly resource-saving option.

Support layer/sublayer 

The sublayer consists of softwood elements (spruce-fir underlayer) or a wooden composite (HDF) bonded orthogonally to the top layer.

Spruce-fir underlayer

This sublayer is the classic option for parquet, containing 100% authentic European wood. To achieve the high quality Bauwerk is known for, we only use wood with vertical annual rings, because it tends to exhibit less swelling and shrinkage than horizontal ones.

HDF sublayer

Thanks to HDF technology, Bauwerk combines the natural look and unique feel of authentic wooden floors with impressive performance and durability. This high-tech parquet offers all the advantages of a wooden floor with a traditional spruce base and a top layer of 2.5 to 3 mm. HDF bases make more sustainable, economical use of valuable high-grade wood possible.

High-density fibreboard as a resilient, durable base

With their high density and fully bonded top layer, parquets with HDF bases have consistent form stability. Bauwerk’s HDF parquet can therefore be sanded as often as parquets with classic softer wood bases, which need a thicker top layer. The effective usability and durability of parquet are not primarily defined by the top layer thickness; instead, it is determined by structural quality, perfect top layer grip and precise processing.

3-layer parquet

3-layer parquet sets lower requirements for the underfloor base and facilitates floating installation. It is also suited for installation with underfloor heating. The parquet elements are joined together using tongues and grooves, or click technology.

Top layer 

The top layer of parquet, also known as the wear layer, consists of authentic wood and is at least 3.5 mm thick. Different types of high-value wood are used for the top layer, including oak, beech, maple, walnut and cherry.

Middle layer

The middle later consists of softwood elements (spruce-fir underlayer) with HDF end pieces bonded orthogonally to the top layer.

Stabilising layer

prefinished 3-layer parquet has a stabilising layer. It stabilises the entire structure and also consists of fir veneer.

Graphique : Parquet 3-plis avec légende

Caption:

1) Screed
2) Adhesive
3) Countermove with spruce veneer
4) White glue
5) Spruce-fir middle layer with HDF end pieces
6) White glue
7) Top layer
8) Various layers of lacquer or oil



Where you can buy Bauwerk Parquet

Find an installer near you and get individual advice.

Find an installer
Wählen Sie Ihre Länderseite, um Inhalte für Ihren Standort zu sehen.
Select your country page to see content for your location.
Sélectionnez la page de votre pays pour voir le contenu de votre emplacement.
Seleziona la pagina del tuo paese per visualizzare i contenuti per la tua posizione.